Power Converters

Power converters transform power from one form to another. For example 240V AC to 48V DC (Rectifiers) or from DC to AC (inverters). The solutions that Amiran offers are telco grade and are specifically targeted to telecommunication systems operators.

 1. UDC+ Power System (Rectifiers)

 The Gamatronic 1UDC+ rectifier system provides clean DC power to sensitive equipment while simultaneously charging a battery bank. It supplies DC backup power during mains failure.

 The 1UDC+ basic configuration consists of a 19” 1U sub-rack that can house up to 3 hot-plugged rectifier modules, or 2 rectifiers modules, a controller and an LVD (Low Voltage Disconnect) device. When configured to maximum capacity it consists of Up to 13 sub-rack (38 rectifiers + controller), supplying a total of 1266 A. The whole setup is only 13U high.

 2. IPU1000 Telecom DC/AC Inverter

The IPU1000 series is an inverter system made up of 1000VA modules. It employs high-frequency PWM technology and a microprocessor that controls all operations and diagnostics.

The series is characterized by small size, light weight parallel ability, redundancy, efficiency and reliability.

Each inverter occupies 9.5″ at a 1U height so that each 19″ 1U shelf can house 2 inverter modules.

High frequency conversion enables the use of very small components.

Synchronization is accomplished by purely digital means, with advanced circuitry.

The front panel is designed for simple and efficient operation using a lucid display of all important parameters. IPU1000 allows the paralleling of several units to enhance power capacity and to achieve N+1 redundancy.

 The entire system can be connected to a static switch unit such as Gamatronic’s STSW-1U to provide a bypass path to an alternative AC source. IPU1000 can also be used as a stand-alone unit.

 3. Automatic Voltage Regulators (AVRs)

AVRs protect sensitive equipment from over or under voltage.

Control and Management systems (C&M)

This systems enable power equipment to be managed and controlled remotely. This enables operators to detect faults before it is too late.

G5: C&M System for Site management

Data centers and other mission critical sites are the heart of every organization. To insure they continue to function at all times, systems must be protected from power fluctuations, environmental changes, physical intrusions and other calamities. 

The G5 enables remote monitoring for the whole line of Gamatronic products, it also includes specialized power-oriented features like monitoring KWH pulse meters and sending reports to the end user.

GMAC5: Web/SNMP Management Card

GMAC is a communication device for UPS monitoring, enabling management and control of the UPS and power systems from local or remote locations.

 Once installed the GMAC5 provides real-time information about the UPS or the power system’s general status.

Upon detection of a power system failure, the GMAC5 notifies predefined recipients via email or via SNMP V2 & V3 communication.

GMAC5 can operate through a variety of parallel connections, protocols, and applications at the same time. It is compatible with all Gamatronic products as well as other manufacturers.

PSM+ UPS Management Software

PSM + a Power System Management software supplies continuous, real-time information about power equipment's operational status.

The PSM+ will supply you with around the clock updates about your UPS and dc power systems and will monitor your individual power supply systems locally or from a remote location.